The reservoir model developed in the previous two sections will now be applied to history-matching production data from a well in a volumetric, internal gas-drive reservoir. Actual oil production and instantaneous gas-oil ratios for the first 3 years of the life of the well are plotted in Fig. 12.1. The data for the problem were obtained… Continue reading The History Match
Category: History Matching
https://myapps.elegantwallp.com/wp-content/uploads/2024/02/History-Matching.png
Incorporating a Flow Equation into the Model
The procedure mentioned in the previous section yields oil and gas production as a function of the average reservoir pressure, but it does not give any indication of the time required to produce the oil and gas. To calculate the time and rate at which the oil and gas are produced, a flow equation is… Continue reading Incorporating a Flow Equation into the Model
History Matching with the Zero-Dimensional Schilthuis Material Balance Equation
Development of the Model The equations do not have a time dimension associated with them. These equations simply relate average reservoir pressure to cumulative production. To obtain rate information, a method is needed whereby time can be related to either the average reservoir pressure or cumulative production. Single-phase flow in porous media was discussed and… Continue reading History Matching with the Zero-Dimensional Schilthuis Material Balance Equation
History Matching with Decline-Curve Analysis
Decline-curve analysis is a fairly straightforward method of predicting the future production of a well, using only the production history of that well. This type of analysis has a long tradition in the oil industry and remains one of the most common tools for forecasting oil and gas production.8–13 In general, there are two approaches to… Continue reading History Matching with Decline-Curve Analysis
Introduction
One of the most important job functions of the reservoir engineer is the prediction of future production rates from a given reservoir or specific well. Over the years, engineers have developed several methods to accomplish this task. The methods range from simple decline-curve analysis techniques to sophisticated multidimensional, multiflow reservoir simulators.1–7 Whether a simple or complex… Continue reading Introduction