Category: Mechanical And Durability Testing Of Aerospace Materials

https://myapps.elegantwallp.com/wp-content/uploads/2024/02/Mechanical-And-Durability-Testing-Of-Aerospace-Materials.png

Certification of aerospace materials

Pyramid approach to aircraft certification The certification of structural and engine materials is one of the most important issues with the testing and evaluation of new aircraft. Certification is also performed when new materials are used in major structural refits of existing aircraft, usually for life extension. Certification is essential to ensure the materials are… Continue reading Certification of aerospace materials

Environmental durability testing

Corrosion testing of metals One of the most damaging environmental effects of aerospace metals is corrosion. Corrosion of the metal alloys used in aircraft structures and engines occurs in many forms, including general corrosion, stress corrosion, pitting corrosion, crevice corrosion and exfoliation corrosion. The describes the corrosion properties of metals. There is no single, universal corrosion test; instead… Continue reading Environmental durability testing

Creep test

Creep is a plastic deformation process that occurs when materials are subjected to elastic loading for a long period of time, often at high temperature. Engineering materials do not plastically deform when loaded within the elastic regime for short times. However, when the elastic load is applied for a sufficient period the material eventually deforms… Continue reading Creep test

Drop-weight impact test

Fibre–polymer composites are susceptible to damage from impact events such as bird strike, dropped tools during aircraft maintenance, tarmac debris kicked-up by the wheels during take-off or landing, and large hail stones. Impact testing is performed at different impact energy levels to screen composite materials for damage resistance and damage tolerance. The most common and… Continue reading Drop-weight impact test

Fracture test

Fracture toughness is an engineering property that defines the resistance of a material against cracking. Tough materials require large amounts of energy to crack whereas low toughness materials have little resistance against cracking. For the materials used in aircraft structures, fracture toughness is just as important as other mechanical properties such as elastic modulus and… Continue reading Fracture test

Hardness test

Simply stated, hardness is the resistance of a material to permanent indentation. Hardness is not a precisely defined engineering property, such as elastic modulus or yield strength, but it is still widely used to describe the resistance of materials to plastic deformation. The hardness of ductile materials is related to their yield strength, and the… Continue reading Hardness test

Flexure test

The flexure test measures the mechanical properties of materials when subjected to bending load. A flat rectangular specimen is loaded at three or four points, as shown in Fig. 5.14. The load causes the specimen to flex, thus inducing a compressive strain on the concave side, tensile strain on the convex side, and shear along the mid-plane.… Continue reading Flexure test

Compression test

The compression test determines the mechanical properties of materials under crushing loads. There are many aircraft structures that carry compression loads, such as the undercarriage during take-off and landing or the upper wing surface during flight, and therefore the mechanical behaviour of their materials must be determined by compression testing. It is often assumed that… Continue reading Compression test